Click Seal

Product Code: CLI94

Product Information

Click Seal: - is used to seal the edges and joints on click laminate and timber floors, providing water protection to prevent swelling. Use in areas most likely to come in contact with water, ie: wet shoes, entrance foyers, hallways outside bathrooms and kitchens. Click Seal 80ml tube will cover approximately 6 to 8 sq.mt. of flooring.

• Click Seal was developed to prevent water damage and give added protection to click glue-less floor joints, in areas where water is likely to come in contact with the floor, i.e. entrance foyers from wet shoes and umbrellas, under coffee tables, in hallways leading to kitchens, bathrooms, laundries and doorways leading onto patios.
• Click Seal provides a clear flexible seal to the floor joint while allowing for the boards natural movement.
• Click Seal is a clear water-resistant gel that only adheres to the board edge and not the floor surface.
• Apply Click Seal to the top edge of the tongue before laying the plank.
• Lay the plank immediately, excess Click Seal should squeeze out through the top of the joint.
• Click Seal will not stick or stain the floor surface.
• Allow 5 minutes to dry, then peel off the overfill.

• Tell a Friend